WIRELESS SYSTEM QWS-10

• 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass, with low latency (<5ms), high fidelity (flat frequency response curve), transmission distance: ≥ 30m.

• Press and hold the pairing button on both the transmitter and receiver for more than 2 seconds. If the blue lights on both the transmitter and receiver turn on, it indicates a successful pairing. The transmitter will select the best channel when turned on, and the receiver will automatically follow the transmitter.

• The plug rotates more than 220 degrees, and the rotating joint uses metal damping components. It can maintain good damping sensation even after rotating more than 5000 times.

• Number of channels: 6, and 6 sets of this device can be used simultaneously in the same scene. Supports one transmitter with up to six receivers simultaneously.

• USB dual Type C head, supports simultaneous charging. If there is no volume output for more than 15 minutes, it will automatically shut down.

Specifications：

Sampling rate: 48kHz/24bit.

Delay: ≤ 5ms.

Transmission distance: ≥ 30m.

Frequency response: 20Hz-20kHz,+1.0/-1.0 dB.

THD+N:<0.05% @ 1kHz.

Signal to noise ratio: ≥ 80dB.

Frequency band: 2.4GHz ISM.

Interference handling method: manual frequency hopping.

Battery: Equipped with a built-in lithium battery, it can last for ≥ 5 hours on a single charge.

Number of channels: 6.

Can be used within the same area: 6 sets.

One to many: Only supports one transmitter, with a maximum of six receivers.

Not supporting multiple transmitters, equipped with one receiver, and other connection methods.

SPECIFICATIONS：

Battery: Rechargeable lithium battery 3.7V/mAh.

Frequency response: 20Hz-20kHz.

Volume: 70(W)x30(D)x13mm(H), Folded height: 25.3mm.

Weight: 33g.

Attached accessories: Owner's manual, USB cable.