WIRELESS SYSTEM QWS-10

• 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass, with low latency (<5ms), high fidelity (flat frequency response curve), transmission distance: ≥ 30m. • Press and hold the pairing button on both the transmitter and receiver for more than 2 seconds. If the blue lights on both the transmitter and receiver turn on, it indicates a successful pairing. The transmitter will select the best channel when turned on, and the receiver will automatically follow the transmitter. • The plug rotates more than 220 degrees, and the rotating joint uses metal damping components. It can maintain good damping sensation even after rotating more than 5000 times. • Number of channels: 6, and 6 sets of this device can be used simultaneously in the same scene. Supports one transmitter with up to six receivers simultaneously. • USB dual Type C head, supports simultaneous charging. If there is no volume output for more than 15 minutes, it will automatically shut down. Specifications： Sampling rate: 48kHz/24bit. Delay: ≤ 5ms. Transmission distance: ≥ 30m. Frequency response: 20Hz-20kHz,+1.0/-1.0 dB. THD+N:<0.05% @ 1kHz. Signal to noise ratio: ≥ 80dB. Frequency band: 2.4GHz ISM. Interference handling method: manual frequency hopping. Battery: Equipped with a built-in lithium battery, it can last for ≥ 5 hours on a single charge. Number of channels: 6. Can be used within the same area: 6 sets. One to many: Only supports one transmitter, with a maximum of six receivers. Not supporting multiple transmitters, equipped with one receiver, and other connection methods. SPECIFICATIONS： Battery: Rechargeable lithium battery 3.7V/mAh. Frequency response: 20Hz-20kHz. Volume: 70(W)x30(D)x13mm(H), Folded height: 25.3mm. Weight: 33g. Attached accessories: Owner's manual, USB cable.